P-01
Beams, columns & built-up members
Wide-flange, HSS, channel and plate girders cut, coped and drilled off the model. Camber and splice locations confirmed before fabrication.
W150–W1100 · HSS to 305×305
Sec P-01 — Catalogue
Fabricated in Newmarket
Standard product lines below. Anything not listed is a custom fabrication — send a drawing and we will price it.
P-02
Roof trusses & long-span joists
Shop-assembled trusses for clear spans up to 45 m, shipped in sections sized to your access route and spliced on site.
Spans to 45 m
P-03
Stairs, landings & guards
Egress and architectural stairs with bar grating, checker plate or pan-and-fill treads. Guards detailed to Ontario Building Code loading.
OBC Div. B 3.4
P-04
Mezzanines & equipment platforms
Free-standing or building-supported platforms with joists, deck and access, designed to your live load and forklift requirements.
4.8–12 kPa live load
P-05
Handrail & architectural railing
Picket, glass-infill, cable and wrought-iron railing, prepped for powder coat, hot-dip galvanizing or shop enamel.
Interior & exterior
P-06
Ladders, cages & roof access
Fixed ladders, safety cages, ships ladders, roof hatches and crossovers built to CSA and OHSA access requirements.
CSA / OHSA compliant
P-07
Pipe racks, supports & bollards
Racks, hangers, trapeze supports, equipment stands and impact protection for plants and utility yards.
Carbon & stainless
P-08
Machine bases, frames & skids
Machined and stress-relieved bases, conveyor frames and process skids fabricated to tolerance from your equipment drawings.
±1.5 mm tolerance
P-09
Embeds, base plates & connections
Anchor bolt assemblies, embed plates, shear tabs and connection hardware supplied ahead of the concrete pour.
Supplied to pour schedule
Sec P-02 — Finishes
Coatings & materials
Specify the finish at quote stage. Retrofitting a coating after fabrication costs more than it saves.
F-01
Hot-dip galvanizing
For exterior and wet environments. Vent and drain holes are designed into the member rather than drilled after the fact.
F-02
Shop primer & enamel
Blast to SSPC standards, then alkyd or epoxy primer with a topcoat matched to the architectural specification.
F-03
Powder coat & AESS
Architecturally exposed steel finished to AESS categories, with weld profiles ground and documented before coating.
M-01
Carbon steel
CSA G40.21 350W and 300W, A992, A500 and A36 plate. Mill certificates filed against every heat number.
M-02
Stainless
304 and 316 in food-grade and corrosive service, welded in a dedicated cell with segregated tooling.
M-03
Aluminum & alloys
5052, 6061 and specialty alloys for lightweight platforms, access and architectural work.